Timber Restorer and Sealer

Timber Restorer and Sealer

Timber Restorer and Sealer is based on a unique, hydrophobic, low odour waterborne polymer blend that is perfect to protect all exterior and interior wood surfaces from the degradation by sunlight and mould.  Unlike oil-based timber sealers, the product does not darken the timber finish over time. Cracking, peeling and blistering does not occur and requires no sanding or keying prior to recoating.  Test results indicate UV protection for the equivalent of 2 years without fading or cracking. Provides a tested and proven treatment to safely seal CCA treated pine, enabling future recoating without sanding.

Download Data Sheet

View more from: Sealers

  • Features & Benefits
  • Areas of Use

Features & Benefits

  • Excellent water resistance
  • Proven long term UV protection
  • One coat is often all that is required
  • No cracking, peeling or blistering
  • No sanding required prior to recoating
  • Fast drying for rapid recoating and end-use
  • Permanent UV filters to reduce damage from sunlight
  • Low odour, environmentally friendly
  • Effective treatment to seal CCA (Copper Chrome Arsenate treated timber)
  • Semi-transparent
  • Highly water resistant
  • Effective in resisting mould growth
  • Complete alkali resistance
  • Waterborne technology

Areas of Use

  • Wood decks
  • Pergolas
  • Windows and doors
  • Fascias & Gables
  • Garden furniture
  • Cladding
  • Other exterior and interior woodwork
  • Villa Board and other cementitious cladding

Instructions

  • YOU WILL NEED

    YOU WILL NEED

    1 Litre of timber Restorer will cover approximately 3-5m²

  • EQUIPMENT

    EQUIPMENT

    Timber Restorer is easily applied with a short nap pad, brush or short hair roller

  • NUMBER OF COATS

    NUMBER OF COATS

    1 full coat can provide adequate protection on less porous wood. With porous wood, 2 thin coats are recommended

  • DRYING TIME

    DRYING TIME

    Allow 30 minutesdrying time between coats. Allow 4-6 hours before walking on the surface

  • CLEAN UP

    CLEAN UP

    Timber Restorer is easily cleaned up with water before drying

  • TIPS

    TIPS

    The 2nd coat must be applied within 4 hours of the 1st coat. For a more even look, avoid heavy 2nd coats

Site by Digital Outlook