Brick & Render Sealer

Brick & Render Sealer is a revolutionary waterborne superior acrylic polymer which provides a hard film resistive to water damage, staining, helps to prevent and slow fretting of masonry surfaces and is supplemented with a highly effective biocide to inhibit the growth of fungi, algae and lichens. Brick & Render Sealer is highly resistant to UV light and will not yellow. The use of Brick & Render Sealer prior to painting with acrylic paints will improve their performance and durability. Brick & Render Sealer can be used on any porous or semi-porous masonry needing protection.

Download Data Sheet

View more from: Sealers

Features & Benefits
Areas of Use

Features & Benefits

Clear low sheen to satin finish
Hard wearing
Resists stains and damage to substrate
Resists algal and other growth
Good weather and UV resistance
Safe and easy to use
Highly water repellent

Areas of Use

Concrete panels (when cleaned)
Rendered walls
Brick walls
Blue board
Hebal

Instructions

YOU WILL NEED

1litre of Brick and Render Sealer will cover approximately 5-6² of wall area
EQUIPMENT

Brick and Render Sealer is easily applied with a paint brush, roller or spray depending on surface
NUMBER OF COATS

2 coats are required and should be applied at 90o to each other
DRYING TIME

Allow 30 minutes drying time between coats. Leave for 7 days to fully cure before painting. After 24 hours it will be weather resistant
CLEAN UP

Brick and Render Sealer is easily cleaned up with water before it dries
TIPS

Clean surfaces of all contaminants such as efflorescence, mould, lichen, etc. Remove all grease, dust or dirt. Wash surface with water and scrubbing brush, rinse and allow to dry thoroughly. Efflorescence should be treated with Crommelin Efflorescence Remover