Concrete Floor Sealer

Concrete Floor Sealer

Concrete Floor Sealer is a waterborne, penetrating acrylic sealer and dustproofer.  It is based on a hard resin that provides a durable and serviceable finish with excellent adhesion to concrete floors.  Gloss levels can be varied by the number of coats applied.

View more from: Sealers

  • Features & Benefits
  • Areas of Use

Features & Benefits

  • Excellent adhesion
  • Good resistance to water, detergents, oils and mild acids and alkalis
  • Fast drying and rapid hardness
  • Waterborne and non-toxic
  • Can be top coated with acrylic paint and floor treatments
  • Brush, roller, sponge or spray application
  • Low sheen finish

Areas of Use

  • Commercial areas
  • New domestic concrete floor areas
  • Light industrial buildings
  • Warehouses
  • Domestic Sheds (no vehicular traffic)

Instructions

  • YOU WILL NEED

    YOU WILL NEED

    1litre of Concrete Floor Sealer will cover approximately 5m² of concrete floor

  • EQUIPMENT

    EQUIPMENT

    Conrete Floor Sealer is easily applied with a roller or lambswool applicator to achieve the desired finish to your floor

  • NUMBER OF COATS

    NUMBER OF COATS

    2 coats are required to give a dustproof and hardwearing decorative finish to your floor

  • DRYING TIME

    DRYING TIME

    Allow 30 minutes drying time between coats. Leave the floor for 4 hours to cure before replacing your furniture

  • CLEAN UP

    CLEAN UP

    Concrete Floor Sealer is easily cleaned up with water before the product dries

  • TIPS

    TIPS

    Apply to dry surface. To test moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp

Site by Digital Outlook