Dampstop
Dampstop is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier.
View more from: Sealers
- Features & Benefits
- Areas of Use
Features & Benefits
- Tough impervious coating with a low/semi gloss finish
- Excellent adhesion to damp or dry surfaces
- High chemical resistance, including oils, fats and solvents
- Simple to use with 1:1 mixing ratio
- Non-toxic and non-flammable
- Easily cleaned up with water
- Easy to apply by brush, roller or spray
Areas of Use
Controlling rising damp prior to application of:
- Timber floors
- Waterproofing coatings
- Other coatings
Coating of concrete floors in:
- Workshops
- Food processing
- Hospitals
- Laboratories
Instructions
-
YOU WILL NEED
1litre of DAMP STOP will cover approximately 2.5-4m²
-
EQUIPMENT
Dampstop is easily applied with a paint brush, roller or airless sprayer
-
NUMBER OF COATS
2 coats are required
-
DRYING TIME
Allow 4-6 hours drying time between coats. Full cure will take 7 days
-
CLEAN UP
Dampstop is easily cleaned up with water before it dries