Slate Sealer

Slate Sealer

Slate Sealer is a high gloss, durable coating that seals and protects old and new slate surfaces while bringing out the natural colours.  Recoating when necessary is no problem as the new coat will blend with the old to provide a new, hard wearing surface.

View more from: Sealers

  • Features & Benefits
  • Areas of Use

Features & Benefits

  • Enhances natural colour with a “wet look” finish
  • Seals and protects from staining
  • Easy to re-coat

Areas of Use

  • Natural slate floors
  • Natural slate surfaces

How to enhance and protect slate floors

Instructions

  • YOU WILL NEED

    YOU WILL NEED

    1litre of Slate Sealer will cover approximately 6-7m² of slate

  • EQUIPMENT

    EQUIPMENT

    Slate Sealer is easily applied by a lambswool applicator

  • NUMBER OF COATS

    NUMBER OF COATS

    2 coats are required to give a hardwearing finish to your slate

  • DRYING TIME

    DRYING TIME

    Allow 30 minutes drying time between coats. Leave for 4 hours to cure before walking on floor

  • CLEAN UP

    CLEAN UP

    Slate Sealer is easily cleaned up with Crommelin Cleaning and Thinning Solvent

  • TIPS

    TIPS

    Apply to dry surface. To test moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp

Finish the Job

Other products you may need to finish the project

Site by Digital Outlook