Exterior Grade Waterproofing

Exterior Grade Waterproofing

Exterior Grade Waterproofing is a high performance synthetic rubber-based membrane, designed to offer waterproofing to areas subjected to permanent immersion. When used in combination with a reinforcing fabric,Exterior Grade Waterproofing exhibits outstanding toughness and resistance to puncture.

View more from: Waterproofing Products

  • Features & Benefits
  • Areas of Use

Features & Benefits

  • Suitable for collecting drinking water
  • High permanent elongation to accommodate thermal and structural movement
  • Excellent adhesion to substrates
  • Excellent crack bridging properties
  • May be reinforced for increased puncture resistance
  • Safe and easy to use
  • Quick drying

Areas of Use

  • Roofs
  • Gutters
  • Caravans
  • Hardie/CSR fibre board and Plywood
  • Steel and aluminium
  • Concrete, cement render, plaster
  • Brick
  • Light weight aggregate block

How to fix leaking gutters, roofs and flashings

Instructions

  • YOU WILL NEED

    YOU WILL NEED

    1litre of Exterior Grade Brushable Waterproofer will seal approximately 1.5m²

  • EQUIPMENT

    EQUIPMENT

    Exterior Grade Brushable Waterproofer is easily applied with a paint brush

  • NUMBER OF COATS

    NUMBER OF COATS

    A minimum of 2 coats are required and should be applied at 90 degrees to each other

  • DRYING TIME

    DRYING TIME

    Allow 2 hours drying time between coats. Keep the surface dry for 24 hours before exposing to water or rain

  • CLEAN UP

    CLEAN UP

    Exterior Grade Brushable Waterproofer easily cleaned up with water before it dries

  • TIPS

    TIPS

    Any areas of pin holing or rust damage should be reinforced using Reinforcing Bandage between coats of Exterior Grade Brushable Waterproofer

Finish the Job

Other products you may need to finish the project

Site by Digital Outlook