Pond Sealer Colours

Pond Sealer Colours

Pond Sealer Colours is a seamless membrane, designed for waterproofing new or renovated fish ponds and water features. Consisting of a heavy-duty synthetic rubber compound, Pond Sealer Colours is a tough elastomeric material that will remain watertight under permanently wet conditions. Available in Black, Blue and Sandstone.

 

 

 

 

View more from: Waterproofing Products

  • Features & Benefits
  • Areas of Use

Features & Benefits

  • Remains permanently elastic to accommodate structural movements
  • Non-toxic and safe for fish and plants
  • Suitable for use in collecting or storing drinking water
  • Safe and easy to apply
  • Excellent adhesion to substrates
  • Quick drying
  • Good crack bridging properties
  • Easy to repair

Areas of Use

  • Fish ponds
  • Ornamental water features

Instructions

  • YOU WILL NEED

    YOU WILL NEED

    1litre of Pond Sealer Colour will cover approximately 0.75m² of pond

  • EQUIPMENT

    EQUIPMENT

    Pond Sealer is easily applied with a paint brush or roller

  • NUMBER OF COATS

    NUMBER OF COATS

    A minimum of 2 coats of are required and should be applied at 90 degrees to each other. A third coat maybe required to reach the specified thickness

  • DRYING TIME

    DRYING TIME

    Allow 2 hours drying time between coats. Leave for 7 days to fully cure before filling your pond

  • CLEAN UP

    CLEAN UP

    Pond Sealer is easily cleaned up with water before it dries

  • TIPS

    TIPS

    Apply to dry surface. To test moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp

Finish the Job

Other products you may need to finish the project

Site by Digital Outlook