Reinforcing Fabric with Bond Breaker
Crommelin Reinforcing Fabric with Bond Breaker is a 100mm wide self-adhesive non-woven polyester fabric, incorporating a self-adhesive portion (central 1/3 of tape) that acts as a bond-breaker over joints, cracks or other areas of movement.
When used in conjunction with Crommelin liquid applied waterproofing membranes the combined system will meet the requirements of AS 3740 “Waterproofing of Wet Areas Within Residential Buildings”.
• Breaks bond of membrane system to allow movement at joints.
• Does not crease during installation.
• Bridges gaps.
• Strengthens membranes by increasing tensile strength and puncture resistance.
• Permanently flexible.
• Easy to wet out.
• Outstanding conformability.
• Rot proof for long term performance.
- Brickwork
- Cementitious Substrates
- Compressed Cement Sheets
- Concrete
- Concrete Blocks
- Exterior
- Fibre Cement Sheeting
- Gyprock (wet area)
- Interior
- Masonry
- Mortars (Brick & Slab Edge)
- Natural Stone
- Particle Board
- Plywood Sheeting
- Prefabricated Concrete
- Rammed Earth
- Reconstituted Stone
- Renders
- Screeds
- Waterproofing Membrane Accessories
- Wet Area Gyprock
