Water Based Bitumen Paint is a waterborne bitumen emulsion modified with a synthetic rubber copolymer to provide excellent waterproofing properties with good flexibility. VOC Content of Water Based Bitumen Paint is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1, and APAS D181.
View more from: Waterproofing Products
1litre of Water Based Bitumen Paint will cover approximately 0.75m² of wall area
Water Based Bitumen Paint is easily applied with a paint brush or roller
2 coats are required and should be applied at 90 degrees to each other
Allow 30 minutes drying time between coats. Leave for 7 days to fully cure before back filling
Water Based Bitument Paint is easily cleaned up with water before it dries. If it is difficult to remove or clean use mineral turpentine
Apply to dry surface. To test moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp