Pond Sealer Clear is a seamless clear sealer, designed for waterproofing new or renovated fish ponds and water features. Suitable for surfaces and structures that will not experience movement, Pond Sealer Clear will remain watertight under permanently wet conditions. Where there are pre-existing holes, cracks or expected movement, use one of the Pond Sealer Colour membranes.
View more from: Waterproofing Products
1litre of Pond Sealer Clear will cover approximately 3-5m²
Pond Sealer is easily applied with a paint brush or roller
A minimum of 2 coats of are required and should be applied at 90o to each other. A third coat maybe required to reach the specified thickness
Allow 2 hours drying time between coats. Leave for 7 days to fully cure before filling your pond
Pond Sealer is easily cleaned up with water before it dries
Apply to dry surface. To test moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp