Crommelin Pool Paving Sealer provides a durable and long lasting protection to a wide variety of paving and stenciled/patterned concrete surfaces
You Will Need
1 litre of Pool Paving Sealer will cover approximately 3-5m(2) depending on the porosity of the
Equipment
Pool Paving Sealer is easily applied by brush, roller or spray
Number of Coats
2 coats are required to give a good stain and water repellant seal to paved surfaces
Drying Time
Allow 30 minutes drying time between coats Allow 2 hours before walking on the surface
Clean Up
Please refer to the product label for the most effective method of clean up
Tips
Apply to a dry surface. To test for moisture, tape down a clear plastic sheet over a small section of the surface to be treated in direct sunlight and leave for 2 hours. If moisture appears on the underside of the sheet the area is too damp