Crommelin Exterior Grade Brushable Waterproofer is water based and quick drying. Suitable for use in areas such as gutters, roofs and flashings.
You Will Need
1litre of Exterior Grade Brushable Waterproofer will seal approximately 1.5m²
Equipment
Exterior Grade Brushable Waterproofer is easily applied with a paint brush
Number of Coats
A minimum of 2 coats are required and should be applied at 90 degrees to each other
Drying Time
Allow 2 hours drying time between coats. Keep the surface dry for 24 hours before exposing to water or rain
Clean Up
Exterior Grade Brushable Waterproofer easily cleaned up with water before it dries
Tips
Any areas of pin holing or rust damage should be reinforced using Reinforcing Bandage between coats of Exterior Grade Brushable Waterproofer