WB2K
Crommelin WB2K is a two part epoxy coating formulated for use as a positive and negative side moisture barrier, a tough abrasion resistant floor sealer and as a premium primer and surface consolidator for use prior to the application of Crommelin waterproofing membranes.
WB2K combines the excellent adhesion and durability of epoxy resins with the advantages of a water based formula.
• Highly waterproof – for both positive and negative side waterproofing.
• Controls rising damp prior to the application of waterproofing membranes, floor finishes and other coatings.
• Excellent adhesion to damp and dry surfaces.
• Tough interior final finish coating.
• High chemical, oil, fat, and solvent resistance.
• Non-toxic, non-flammable and easy clean up with water.
• Easy to apply by brush, roller or spray.
• Simply 1:1 mixing ratio by volume.
• Low sheen to semi gloss finish.
- Brickwork
- Cementitious Substrates
- Compressed Cement Sheets
- Concrete
- Concrete Blocks
- Fibre Cement Sheeting
- Gyprock (wet area)
- HardieDeck
- Masonry
- Metal
- Metal (suitably prepared)
- Natural Stone
- New/Green/Fresh Concrete
- Particle Board
- Plaster Board
- Plywood Sheeting
- Prefabricated Concrete
- Renders
- Screeds
- Wet Area Gyprock
- Adhesion Promoter
- Balconies
- Basements
- Below Ground (critical)
- Carparks
- Concrete Floors
- Damp Surfaces
- Domestic Floors
- Factory Floors
- Floor Finish
- Food Proccessing Areas
- Garages
- Interior
- Kitchens
- Laboratories
- Laundries
- Moisture Barrier
- Negative Waterprofing
- Negative Waterproofing
- New/Green/Fresh Concrete
- Plant Rooms
- Planter Boxes
- Podium Decks
- Podiums
- Primer
- Priming below waterproofing membranes
- Retaining Walls
- Rooftops
- Stairs
- Tanks
- Under Timber Floors
- Vertical Surfaces
- Walls
- Water Tanks
- Wet Areas
- Workshops
